Posts Tagged With: The Flying Nun

It Went Outside!

…Granted, it was on a very short leash and it didn’t go *far*, but it’s no longer in the R&W shop! (It’s in Robert’s other garage, both to keep it clean [ish] for the August 13 party and also to free up space for other feats of fabrication magic.)

First, though, a few final construction photos, from my visits on July 6, July 12, and July 15, and a couple that Robert sent me.

From July 6, this shows the front fender in progress, and the slider (aka rocker panel protection and footrest) mocked up in almost its final location.

DSC03605

From July 12, this shows the front fender all completed. Not only is the curved panel installed, but the filler panel between the fender and the hood is welded in, too. The slider hasn’t yet been permanently mounted.

IMG_1549

This picture, of the passenger-side fender, shows the artistry and effort that went into its construction. There are at least 3 separate pieces of bent tube and more than 8 pieces of plate in each fender! The top curved pieceĀ had to be bent to match the curve of the hood; the tie-in to the grille (not shown here) had to be custom-formed; the multiple pieces of tube had to be sleeved, welded, and ground smooth; the various other pieces of plate needed welding and smoothing, and so on. I don’t know, and I don’t think I *want* to know, how many manhours went into each fender – but I’m sure it was a lot!

IMG_1543

Also from July 12, here is a shot of the cargo area. The spare tire carrier is welded to the framework that also supports the gas tank (which is hiding behind the angled plate beneath/behind the tire). The box in the foreground had to be narrowed by about a half inch (I don’t know the exact amount of narrowing required) to fit it between the fender wells, but now I have secure space for tools and parts and other stuff!

IMG_1541

And from July 15, here it is, ready to go outside for the VERY FIRST TIME! The tow bar is in its permanent location, but will either be replaced or modified so that it sitsĀ level when the ‘Monster is actually being towed. I hope that doesn’t happen very often!DSC03613

From the front it looks a little like The Flying Nun. The fenders only look weird from straight in front of it – if you move even just a little to one side, they come into perspective really well.

DSC03612

At the “Coming-Out Party,” Robert wants to show some of his handiwork that’ll be hidden when it’s all put together, so he unbolted the tool/parts box, the gas tank, and the spare, and I brought them all home with me. The cargo bed looks HUGE without them!

DSC03608

This is one of the photos Robert sent me – it’s the passenger-side fender, totally unbolted and sitting/lying on the floor. LOTS of work in this!

IMG_1529

Here’s a shot of the gas tank cover / spare tire carrier.

IMG_1534

Last, but NOT least, here is the JeepMonster outside! You can see the terrible angle that the tow bar makes; I have a 10″-rise hitch, and Robert found someone with a drop end on a tow bar, so between the two we should be able to make a solid towing connection (that I hope will never be used!).

0716 First Daylight

Some of the proportions look slightly “off” in this photo, but I think that’s because of the particular camera angle and the tree in the background. When it was in the shop, NOTHING seemed the least bit out of its proper proportion!

As noted before, the JeepMonster will be at the Tucson, AZ, 4Wheel Parts store (on Speedway) from 8 AM to noon on Saturday, August 13. If you’re anywhere nearby, please come see it in person!

Categories: 6wd, 6x6, CJ-6, Custom Frame, Custom Jeep Body, Jeep, JeepMonster, tandem axle, Uncategorized | Tags: , , | Leave a comment

Blog at WordPress.com.