Posts Tagged With: 4Wheel Parts

Homecoming!

Have you ever looked forward to an event (with either anticipation or trepidation) and thought it would *NEVER* arrive, only to have it sneak up on you before you were really ready for it? That happened to me during the past week, and today I’m proud (and relieved) to announce that the JeepMonster was successfully installed in my garage yesterday afternoon.

The process started Friday evening, when I arrived at R&W about 6:30 PM. Robert had invited me the previous week to come at 6, and then early Friday afternoon he said I could come sooner, but I was trying to do too many things at once and ended up being late, even for the original appointed time. Robert was quite gracious, though, and didn’t chew me out *too* badly. 🙂

I had thought there was going to be more to do, but all that happened was I loaded the tow bars into the truck and Robert winched the JeepMonster onto his trailer for transport the next morning.

DSC04051

We were supposed to meet at 4Wheel Parts Saturday morning at 7, but I was asked to stop somewhere and pick up some burritos for breakfast, so I got there a little late. By the time I arrived, Robert had already offloaded the JeepMonster and his buggy and moved the truck-and-trailer out of the way.

I apparently wasn’t paying attention, because when I looked around at some point, the local classic-rock radio station, KLPX (96.1 FM), had set up for an on-site broadcast. [Robert had arranged with the 4Wheel Parts people to display the ‘Monster from 8 to noon, and the store was running a one-day sale, so it made sense to have the radio station there – I just didn’t notice when they arrived.]

DSC04070

There was good attendance at the event, as evidenced by all the 4x4s clogging up – er, parked in – the parking lot.

DSC04075

After the party at 4Wheel Parts, Robert reloaded both his buggy and the ‘Monster. Then he delivered the ‘Monster to my house. He, a friend of his, and I (well, he and his friend) got it off the trailer, and they helped me get it turned so I could winch it into the garage. They were (rightly) skeptical of my plan to use a 2000-lb boat winch, but I had successfully pulled my truck up the driveway and into the garage on Friday using it, so I pressed on. This picture shows a point where I had to re-rig the winch line and straps for the second phase. The boat winch doesn’t have a very long cable, so I couldn’t simply unreel enough to get from the ‘Monster to the anchor point in the house. The Jeep’s weight also taxed the winch to the point where it overheated and quit a couple of times, but it always recovered sufficiently to get over the next obstacle.

DSC04085

One thing I had always been concerned about was the Jeep’s height, especially when Robert told me he had to remove the top bow to get it out of his garage with the 7′ door (his shop has a taller door, so that wasn’t an issue there). But he had reassured me several times that the Jeep would be under 7 feet tall, and by golly he was right! The next photo shows the highest part of the Jeep *just* missing the weather strip at the top of the door opening. It’s a good thing, too – otherwise, I was likely going to have to put the top down every time I went in or out of the garage. At least I don’t have to worry about that! [Plus, when it’s all done, it’ll be heavier and will presumably sit lower as a result.]

DSC04086

So it’s now in my garage, more-or-less (I hope more than less!) protected from rust-producing rain and humidity while I work on it for the next however-many-months it’ll be. It doesn’t *quite* fit under my storage racks, so I’ll have to take that into consideration when I plan heavy-duty stuff like pulling the engine. But it *does* fit inside my garage! See?

DSC04088

Here’s a parting shot of me sitting proudly in the JeepMonster at 4Wheel Parts on Saturday, August 13, 2016. It sure is big!

IMG_1598

Categories: 6wd, 6x6, CJ-6, Custom Frame, Custom Jeep Body, Jeep, JeepMonster, tandem axle, Uncategorized | Tags: , , | Leave a comment

It Went Outside!

…Granted, it was on a very short leash and it didn’t go *far*, but it’s no longer in the R&W shop! (It’s in Robert’s other garage, both to keep it clean [ish] for the August 13 party and also to free up space for other feats of fabrication magic.)

First, though, a few final construction photos, from my visits on July 6, July 12, and July 15, and a couple that Robert sent me.

From July 6, this shows the front fender in progress, and the slider (aka rocker panel protection and footrest) mocked up in almost its final location.

DSC03605

From July 12, this shows the front fender all completed. Not only is the curved panel installed, but the filler panel between the fender and the hood is welded in, too. The slider hasn’t yet been permanently mounted.

IMG_1549

This picture, of the passenger-side fender, shows the artistry and effort that went into its construction. There are at least 3 separate pieces of bent tube and more than 8 pieces of plate in each fender! The top curved piece had to be bent to match the curve of the hood; the tie-in to the grille (not shown here) had to be custom-formed; the multiple pieces of tube had to be sleeved, welded, and ground smooth; the various other pieces of plate needed welding and smoothing, and so on. I don’t know, and I don’t think I *want* to know, how many manhours went into each fender – but I’m sure it was a lot!

IMG_1543

Also from July 12, here is a shot of the cargo area. The spare tire carrier is welded to the framework that also supports the gas tank (which is hiding behind the angled plate beneath/behind the tire). The box in the foreground had to be narrowed by about a half inch (I don’t know the exact amount of narrowing required) to fit it between the fender wells, but now I have secure space for tools and parts and other stuff!

IMG_1541

And from July 15, here it is, ready to go outside for the VERY FIRST TIME! The tow bar is in its permanent location, but will either be replaced or modified so that it sits level when the ‘Monster is actually being towed. I hope that doesn’t happen very often!DSC03613

From the front it looks a little like The Flying Nun. The fenders only look weird from straight in front of it – if you move even just a little to one side, they come into perspective really well.

DSC03612

At the “Coming-Out Party,” Robert wants to show some of his handiwork that’ll be hidden when it’s all put together, so he unbolted the tool/parts box, the gas tank, and the spare, and I brought them all home with me. The cargo bed looks HUGE without them!

DSC03608

This is one of the photos Robert sent me – it’s the passenger-side fender, totally unbolted and sitting/lying on the floor. LOTS of work in this!

IMG_1529

Here’s a shot of the gas tank cover / spare tire carrier.

IMG_1534

Last, but NOT least, here is the JeepMonster outside! You can see the terrible angle that the tow bar makes; I have a 10″-rise hitch, and Robert found someone with a drop end on a tow bar, so between the two we should be able to make a solid towing connection (that I hope will never be used!).

0716 First Daylight

Some of the proportions look slightly “off” in this photo, but I think that’s because of the particular camera angle and the tree in the background. When it was in the shop, NOTHING seemed the least bit out of its proper proportion!

As noted before, the JeepMonster will be at the Tucson, AZ, 4Wheel Parts store (on Speedway) from 8 AM to noon on Saturday, August 13. If you’re anywhere nearby, please come see it in person!

Categories: 6wd, 6x6, CJ-6, Custom Frame, Custom Jeep Body, Jeep, JeepMonster, tandem axle, Uncategorized | Tags: , , | Leave a comment

The “Coming Out” Party

It’s official! Robert has declared that his work on the JeepMonster will be done by August 13, and it will actually COME OUT OF HIS SHOP (on a trailer, but still…)!

Our plan is to show it off for a few hours (8 AM to noon) at the local 4Wheel Parts store (4001 E. Speedway Blvd., Tucson, AZ, USA) before bringing it to my house for the next phase of construction – you know, the part where I get to cut holes in his masterpiece for lights, steering, brakes/clutch, etc., etc., etc., and figure out where all the lines, wires, tubes, linkages, pipes, hoses, and so on will go.

If you’re in Tucson on August 13, and want to see the JeepMonster in person, this is the time to do it!

This will also be a chance for you to test your rig’s articulation, as Robert has said he’ll bring his RTI (Ramp Travel Index) ramp.

Categories: 6wd, 6x6, CJ-6, Custom Frame, Custom Jeep Body, Jeep, Jeep Frame, JeepMonster, suspension, tandem axle, Uncategorized | Tags: , | Leave a comment

Blog at WordPress.com.